Configuring Access Guardian Verifying Access Guardian Users
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 28-111
Profile Source : RADIUS Server Profile,
Profile From Auth Server : Employee,
Classification profile rule : -,
Role : Employee,
Role Source : Profile,
User role rule : -,
Restricted Access : No,
Location Policy Status : Passed,
Time Policy Status : Passed,
Captive-Portal Status : -,
QMR Status : Passed,
Redirect Url : -,
SIP Call Type = Not in a call,
SIP Media Type = None,
Applications = None
MAC-Address: 00:00:00:00:00:02
Sap : -,
Service ID : -,
VNID : -,
ISID : -,
Access Timestamp : 06/01/1989 20:45:26,
User Name : guest2,
IP-address : 20.0.0.1,
Vlan : 20,
Authentication Type : MAC,
Authentication Status : Authenticated,
Authentication Failure Reason : -,
Authentication Retry Count : -,
Authentication Server IP Used = 10.135.62.129,
Authentication Server Used = rad1,
Server Reply-Message = -,
Profile : Contractor,
Profile Source : RADIUS Server Profile,
Profile From Auth Server : Contractor,
Classification profile rule : -,
Role : Contractor,
Role Source : Profile,
User role rule : -,
Restricted Access : No,
Location Policy Status : Passed,
Time Policy Status : Passed,
Captive-Portal Status : Passed,
QMR Status : -,
Redirect Url : -,
SIP Call Type = Normal Call,
SIP Media Type = Video,
Applications = None
-> show unp user details linkagg 100
Port: 0/100
MAC-Address: 00:00:00:00:00:03
Sap : -,
Service ID : -,
VNID : -,
ISID : -,
Access Timestamp : 02/01/2013 20:45:26,
User Name : guest3,
IP-address : 30.0.0.1,
To Next Page
Loading...
