Alcatel-Lucent OmniSwitch 6860 Series

Managing Authentication Servers RADIUS Servers
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 31-9
Vendor-Specific Attributes for RADIUS
The Alcatel-Lucent Enterprise RADIUS client supports attribute 26, which includes a vendor ID and some
additional sub-attributes called subtypes. The vendor ID and the subtypes collectively are called Vendor
Specific Attributes (VSAs). Alcatel-Lucent Enterprise, through partnering arrangements, has included
these VSAs in some vendors’ RADIUS server configurations.
The attribute subtypes are defined in the dictionary file of the server. If you are using single authority
mode, the first VSA subtype, Alcatel-Lucent-Auth-Vlan, must be defined on the server for each
authenticated VLAN. Alcatel-Lucent Enterprise’s vendor ID is 800 (SMI Network Management Private
Enterprise Code).
The following are VSAs for RADIUS servers:
Num. RADIUS VSA Type Description
1 Alcatel-Lucent-Auth-Group integer The authenticated VLAN number. The only
protocol associated with this attribute is
Ethernet II. If other protocols are required, use
the protocol attribute instead.
2 Alcatel-Lucent-Slot-Port string Slot(s)/port(s) valid for the user.
3 Alcatel-Lucent-Time-of-Day string The time of day valid for the user to
authenticate.
4 Alcatel-Lucent-Client-IP-Addr address The IP address used for Telnet only.
5 Alcatel-Lucent-Group-Desc string Description of the authenticated VLAN.
6 Alcatel-Lucent-Port-Desc string Description of the port.
8 Alcatel-Lucent-Auth-Group-
Protocol
string The protocol associated with the VLAN. Must
be configured for access to other protocols.
Values include: IP_E2, IP_SNAP, IPX_E2,
IPX_NOV, IPX_LLC, IPX_SNAP.
9 Alcatel-Lucent-Asa-Access string Specifies that the user has access to the switch.
The only valid value is all.
39 Alcatel-Lucent-Acce-Priv-F-R1 hex Configures functional read privileges for the
user.
40 Alcatel-Lucent-Acce-Priv-F-R2 hex Configures functional read privileges for the
user.
41 Alcatel-Lucent-Acce-Priv-F-W1 hex Configures functional write privileges for the
user.
42 Alcatel-Lucent-Acce-Priv-F-W2 hex Configures functional write privileges for the
user.
43 Alcatel-Lucent-Acce-Priv-F-R3 hex Configures functional read privileges for the
user.
44 Alcatel-Lucent-Acce-Priv-F-R4 hex Configures functional read privileges for the
user.
45 Alcatel-Lucent-Acce-Priv-F-W3 hex Configures functional write privileges for the
user.
46 Alcatel-Lucent-Acce-Priv-F-W4 hex Configures functional write privileges for the
user.