Configuring VLANs Verifying the VLAN Configuration
OmniSwitch AOS Release 8 Network Configuration Guide December 2017 page 4-14
The above example output provides the following information:
• VLAN 200 is the configured default VLAN for port 3/24, which is currently not active.
• VLAN 200 is an 802.1Q-tagged VLAN for port 5/12, which is an active port but currently blocked
from forwarding traffic.
For more information about the resulting displays from these commands, see the OmniSwitch AOS
Release 8 CLI Reference Guide.
To Next Page
Loading...
