Backup Services Commands
Page 34-7
: 3=2
1) Description : Backup 2
2) Admin Status { (E)nabled, (D)isabled } : Enabled
3) Primary Type { Physical Port (1),
Frame Relay PVC (2) } : Frame Relay PVC
30) Slot :
31) Port :
32) DLCI :
4) Backup Type { PPP Peer (1) } : PPP Peer
40) Peer ID :
5) Startup Timer Value { Time in Seconds after
System Startup to wait
for Primary to come up
before activating
Backup } : 300
6) Activate Timer Value { Time in Seconds after
Primary Failure to
activate Backup } : 10
7) Restore Timer Value { Time in Seconds after
Primary restoral to
disable Backup } : 10
(save/quit/cancel)
:
To backup a frame relay PVC, specify the slot (30=x), port (31=x) and DLCI number (32=x) of
the PVC to be backed up. Next, enter the PPP peer index (which defines ISDN call parame-
ters and PPP parameters). Optionally, you can modify the timer values. Below is an example
of backing up the port on slot 3, port 3, PVC DLCI 32 with PPP peer index 1:
To Next Page
Loading...
Need help?
General
