Allen-Bradley PowerFlex 6000 Firmware, Parameters, And Troubleshooting Manual

130 Rockwell Automation Publication 6000-TD004D-EN-P - November 2017
Chapter 2 Parameter Descriptions
Acceleration Time 1
Linear Number: P418
Default Value: 100.0 s
Minimum Value: 1.0 s
Maximum Value: 3276.7 s
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Acceleration Time 1.
Acceleration Frequency 1
Linear Number: P419
Default Value: 10
Minimum Value: 0
Maximum Value: 75
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Acceleration Frequency 1.
Acceleration Time 2
Linear Number: P420
Default Value: 80.0 s
Minimum Value: 1.0 s
Maximum Value: 3276.7 s
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Acceleration Time 2.
Acceleration Frequency 2
Linear Number: P421
Default Value: 20
Minimum Value: 0
Maximum Value: 75
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Acceleration Frequency 2.

Allen-Bradley PowerFlex 6000 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 6000
Category	DC Drives
Language	English