Allen-Bradley PowerFlex 6000 - Appendix A Technical Specifications; Power Rating Ranges; Input and Output Specifications; Configuration and Control

Rockwell Automation Publication 6000-TD004D-EN-P - November 2017 131
Parameter Descriptions Chapter 2
Acceleration Time 3
Linear Number: P422
Default Value: 80.0 s
Minimum Value: 1.0 s
Maximum Value: 3276.7 s
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Acceleration Time 3.
Acceleration Frequency 3
Linear Number: P423
Default Value: 30
Minimum Value: 0
Maximum Value: 75
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Acceleration Frequency 3.
Acceleration Time 4
Linear Number: P424
Default Value: 150.0 s
Minimum Value: 1.0 s
Maximum Value: 3276.7 s
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the Acceleration Time 4.
Acceleration Process Enable
Linear Number: P425
Default Value: 0
Minimum Value: 0
Maximum Value: 1
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter is used to enable or disable the Acceleration Process function.
Value Description
0 Disable Acceleration Process
1 Enable Acceleration Process