174 Rockwell Automation Publication 6000-TD004D-EN-P - November 2017
Chapter 2 Parameter Descriptions
P044 Power Cell Bypass Fault Simulation
Power Cell Count
0 3000000000000 On/OffYY
P045Load Loss Control Enable 0 1000000000000 On/OffYY
P046Load Loss Enable Frequency 0 100202020202020202020202020%On/OffYY
P047Load Loss Control Differential Scaling0 2000888888888888%On/Off Y
P048 Load Loss Frequency Compensation
Upper Limit
0 5555555555555%On/OffYY
P049Load Loss Control Scaling Factor0 2000000000000000%On/Off Y
P050Load Loss Control Integral Time 0 100000000000000msOn/Off Y
P051 Load Loss Control Filter Time 0 200 100 100 100 100 100 100 100 100 100 100 100 100 ms On/Off Y
P052Load Loss Enable Current Threshold0 100101010101010101010101010%On/Off Y
P053 Load Loss Control Exit Delay 0 16000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 ms On/Off Y
P057 Power Cell Bypass Upper Limit Time For
Over Temperature
0 32767 10 10 10 10 10 10 10 10 10 10 10 10 s On/Off Y
P058 Power Cell Bypass Phase A Cell Number
For Simulation
0 9000000000000 On/OffYY
P059 Power Cell Bypass Phase B Cell Number
For Simulation
0 18000000000000 On/OffYY
P060 Power Cell Bypass Phase C Cell Number
For Simulation
0 27000000000000 On/OffYY
P061Power Cell Bypass Fault Simulation-3276832767000000000000 On/OffYY
P065 Power Cell Bypass Enable Frequency
Range Lower limit
0.00 19.99 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 On/Off Y
P066 Power Cell Bypass Restart Enable After
Power Cell Bypassed
0 1111111111111 Offline Y
P068One Phase Lost Filter Time 5 100030303030303030303030303010 msOn/OffYY
P069 Current Stability Loop Enable Frequency
Range2 Upper Limit
0 100 80 80 80 80 80 80 80 80 80 80 80 80 On/Off Y
P070 Current Stability Loop Frequency Range2
Output Scaling Factor
0 100000000000000 On/Off Y
P071 Current Stability Loop Frequency Range3
Output Scaling Factor
0 100000000000000 On/Off Y
P072Current Stability Loop Enable Delay0 163101010101010101010101010 On/OffYYY
P073Input Voltage Loss Filter Time 0 1000000000000000msOn/Off Y
P078 Power Cell Reactivation Time Upper Limit 0 200 100 100 100 100 100 100 100 100 100 100 100 100 ms On/Off Y
P079 VFD Minimum Overload Current 0.00 399.99 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 100.00 % On/Off Y Y
No. Name Min. Max. Default Values Units Modify
Root
Access
2300V 2400V 3000V 3300V 4000V 4160V 6000V 6300V 6600V 6900V 10000V 11000V U S R