Allen-Bradley PowerFlex 6000 Firmware, Parameters, And Troubleshooting Manual

Rockwell Automation Publication 6000-TD004D-EN-P - November 2017 89
Parameter Descriptions Chapter 2
Fan Control Group #4 Fan Number
Linear Number: P098
Default Value: 0
Minimum Value: 0
Maximum Value: 100
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Offline only
This parameter sets the number of fans in the filter cabinet.
Fan Control Main Cooling Fan Cycle Time
Linear Number: P099
Default Value: 720 hr
Minimum Value: 0 hr
Maximum Value: 14400 hr
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the work time of the main cooling fan.
Fan Control Redundant Fan Working Time
Linear Number: P100
Default Value: 1 hr
Minimum Value: 0 hr
Maximum Value: 14400 hr
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the work time of the redundant fan.
Fan Control Fan Feedback Delay
Linear Number: P101
Default Value: 200
Minimum Value: 0
Maximum Value: 1000
Access Level: Setup, R&D
Read/Write: Read/Write
Modify Level: Online/Offline
This parameter sets the feedback delay of the fan status. The unit is 100 ms.

Allen-Bradley PowerFlex 6000 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 6000
Category	DC Drives
Language	English