Appendix G - External Serial Controllers
284
Enova Digital Media Switchers - Hardware Reference Manual
NOTE: The following dialog boxes appear only during the initial USB connection. Once the virtual COM port has been
assigned to the enclosure, the dialog boxes do not appear again. If they do appear, you have connected the USB plug
to a different COM port on the PC than the initial one – either switch to the initial COM port or establish a virtual COM port
for the new port on the PC.
In the Driver Software Installation window, click Close (FIG. 170):
5. Open the Device Manager window (Start/Control Panel/Device Manger icon)*, open Other devices, right-click on
Unknown device and select Properties from the context menu to open the Unknown Device Properties window.
NOTE:
The Device Manager may have a different location depending on the operating system and theme selected.
6. In the Driver tab, select Update Driver (FIG. 171):
7. In the Update Driver Software - Unknown Device dialog, browse for the APBridge.inf file and select Next (FIG. 172):
In the second Update Driver Software window, click Close (FIG. 173):
FIG. 170
Driver Software Installation window
FIG. 171 Unknown Device Properties window (Driver tab)
FIG. 172 Update Driver Software - Unknown Device dialog
To Next Page
Loading...
