Appendix G - External Serial Controllers
285
Enova Digital Media Switchers - Hardware Reference Manual
NOTE:
A Windows Security window may open and ask if you want to install a driver with an unverified publisher. Select the Install
this driver software anyway option.
8. If the AutoPatch USB Bridge port specifies the COM number, go to Step 11. If the port does not specify a COM
number, right-click the AutoPatch USB Bridge, select Properties, and complete all remaining steps (FIG. 174):
9. In the AutoPatch USB Bridge Properties dialog, select the General tab (FIG. 175):
10. Make note of the COM port number assigned to the AutoPatch USB Bridge.
This port number must be entered when setting a connection in a software program or a terminal emulation
program. The PC will always associate a specific USB connector with the assigned virtual COM port. The PC will not
recognize the module if you disconnect and reconnect using a different COM port on the PC.
FIG. 173
Update Driver Software - Unknown Device dialog
FIG. 174 Device Manager
FIG. 175 AutoPatch USB Bridge Properties dialog (General tab)
COM port number (if not displayed, complete all remaining steps)
To Next Page
Loading...
Need help?
General
