S331L UG PN: 10580-00321 Rev. M 1-1
Chapter 1 — General Information
1-1 Introduction
The Site Master S331L User Guide describes the instrument’s system
and file management functions and explains how to perform Cable and
Antenna measurements.
About this Manual
This chapter provides a general overview and information about the
Site Master S331L Cable and Antenna Analyzer and a description of
manual conventions, additional documents, preventive maintenance,
and annual verification requirements.
Chapter 2, “Instrument Overview” provides basic operation information
for the Site Master.
Chapter 3, “Cable and Antenna Measurements” gives an overview of
line sweeping and describes instrument functions in Cable and Antenna
Analyzer Advanced Mode.
Chapter 4, “Classic Mode Operation” describes the menus available in
the Classic Cable and Antenna Analyzer measurement mode, which
emulates the user interface from the Anritsu “D” series Site Master
instruments.
Chapter 5, “Internal Power Meter” describes how to use of the internal
power meter.
Chapter 6, “High Accuracy Power Meter” describes the use of the high
accuracy external USB power meter, including sensor connection and
setup.
Chapter 7, “Calibration” explains why calibration before making a
measurement is critical in line sweeping and details the calibration
methods available including a comparison of Standard Cal to Flex Cal
and using the built-in InstaCal module or external Open, Load, and
Short (OSL) components.
Chapter 8, “File Management” reviews the file management features of
the Site Master using the File menu and the Save menu. These menus
allow the user to save, recall, copy, and delete files in internal memory
or an external USB memory device.
To Next Page
Loading...
Need help?
General
