S331L UG PN: 10580-00321 Rev. M 8-1
Chapter 8 — File
Management
8-1 Introduction
This chapter reviews the file management features of the Site Master
S331L. The File menu and associated submenus allow you to save,
recall, rename, copy, and delete files in internal memory or on an
external USB drive.
The File menu is accessed by pressing the File (1) keypad menu key. In
Video Inspection Probe (VIP) mode, you can alternatively press the
Save/Recall main menu key on the touchscreen.
8-2 Overview
Remember the following tips when reviewing this chapter:
• File management functions apply to files stored in internal
memory or on a removable disk.
• Select the destination for saved files using the Location button
and the Set Location key in the Save dialog box.
• Rename saved files under the File Management menu (File > File
Mgmnt).
• Sort files by tapping a column heading.
• Move up and down file lists using the buttons under the
Navigation submenu.
• Press Esc to return to the previous screen.
• Saved measurements also contain setup information.
• Recalled measurements display in purple and may change the
current instrument settings (which will not be saved) in order to
display the recalled measurement.
• Calibration information is recalled with setup files but not
recalled with measurement files.
• Use the Left arrow key to move out of a folder.
• Use the Right arrow key to move inside of a highlighted folder.
To Next Page
Loading...
Need help?
General
