S331L UG PN: 10580-00321 Rev. M 5-1
Chapter 5 — Internal Power
Meter
5-1 Overview
This chapter provides an overview of power meter measurements and
how to set up the instrument to use the power meter. The power meter
displays measured input power at the power meter connector in dBm
and Watts or relative power in dB and percentage. No external sensor is
required or used. The Power Meter frequency span is fixed to receive
RF frequencies from 50 MHz to 4 GHz.
Note
Check the graph title in the top right of the display to confirm
that the instrument is in Power Meter mode. If necessary,
press the Menu key to change modes.
To Next Page
Loading...
Need help?
General
