S331L UG PN: 10580-00321 Rev. M 8-25
File Management 8-11 File Menu
Recall Menu
Key Sequence: File (1) > Recall
F
ile Recall:
Recall: Press this submenu key to recall the selected file.
Measurements, setups, or screen shots can be recalled.
Recalled measurements are first displayed on the
Site Master as a preview. Press Enter to complete
recalling the measurement or press ESC to cancel
the recall and return to the File Recall menu. Refer
to “Recall File” on page 8-8 for additional
information.
Recalled setups change the current setup including
measurement type, frequency/distance, amplitude,
marker, and limit data.
Recalled screen shots are previewed on the Site
Master. Press ESC to return to the File Recall
menu.
Create Folder: Press this submenu key to create a new
folder in the highlighted location or folder. Name the new
folder with the onscreen keyboard and press Save.
Copy: Press this submenu key to mark the selected files
and/or folders for copying or moving, using the Paste
command. Use the checkbox column to select multiple
items to copy or move.
Paste: Press this submenu key to paste the selected files
and/or folders to the destination location. In the message
box that appears (see Figure 8-20 on page 8-17), press
Paste to create duplicate copies in the destination folder;
press Move to place copies in the destination folder and
remove the selected files from the source location. If files
or folders with the same name already exist in the
destination location, the Site Master will ask you to
confirm that the existing files should be overwritten.
Figure 8-28. Recall Menu (1 of 2)
File Recall
Recall
Create Folder
Copy
Paste
Delete
Navigation
Top
Bottom
Page Up
Page Down
To Next Page
Loading...
Need help?
General
