S331L UG PN: 10580-00321 Rev. M 12-1
Chapter 12 — Video
Inspection Probe (VIP)
12-1 Introduction
Signal degradation may occur as a result of a dirty or damaged optic
fiber ferrule endface. The Site Master S331L supports an application
that lets you inspect fiber optic terminations, using a Video Inspection
Probe (VIP) such as Anritsu Model G0306A. See Figure 12-1. The
captured image and analysis results help determine if a connector
should be cleaned or replaced. Pass/Fail evaluations are made in
accordance with the IEC61300-3-35 standard. You can also save the
data to file and generate test reports.
Figure 12-1. Anritsu G0306A Video Inspection Probe
To Next Page
Loading...
