Name: Ateis IDA8 Series
Brand: Ateis
Rating: 4 (1 reviews)

To Next Page

To Previous Page

IDA8 Global-Net User Manual112

3.2.1.6.2.2 Fault LED

Issue - CD-TOUCHAS is unable to connect by Ateis Studio

The situation happens when the CD-TOUCH has lost communication with audio processor.

Please follow the instruction in How to Solve chapter and check whether the solution meets your

requirements.

LED indicators:

The FAULT LED blinks when the CD-TOUCHAS has lost communication with audio processor.

First, check the information and diagnosed description displayed on [Status Bar] of CD-

TOUCHAS, then move to the following steps listed below and find out the solution that meets

your problem.

1. Check whether the CD-TOUCHAS has been connected with audio processor in the

configuration table.

2. Check whether the RS485 protocol on [Machine Setting] function has been selected to

[PSS/RWD AIO] option, and meets your installed port for PSS AS (this setting is only for

Ateis Global version software)

3. If the device still cannot work with the audio processor, it might result from the broken

device or cables. When facing this problem, please contact our Ateis Local personnel.

Questions and Answers:

Need help?

Do you have a question about the Ateis IDA8 Series and is the answer not in the manual?

Ateis IDA8 Series Specifications

General