Ateis IDA8 Series User Manual

System Products 41
© 2020, ATEÏS. All rights reserved.
Protocol
Interface
Function
Connection
Settings
Modbus
PDC(RS485)
PDC Port 1~ 2
Level control
Paging
Read Monitoring Status
Read Evacuation Status
Play Message
Logic I/O Control
3.1.3 IDA8S
The IDA8S slave unit houses advanced audio digital signal processing (DSP), matrix control
functions and a digital message player, along with amplifier monitoring for hot-swap amplifiers and
loudspeaker line impedance monitoring. Each input and output channel is fitted with a wide range of
pre-and post-processing devices such as volume controllers, routing mixers and switches, priority
and paging components, equalizers, compressors, limiters and delay-lines.
Security & Connectivity
In accordance with EN54-16 and BS5839/8, full monitored supervision from paging microphone
capsule to the end of loudspeaker line.
The IDA8S supports redundant loop network cabling.
Up to 48 simultaneous audio channels per local network.
Up to 256 zones in a local network.

Ateis IDA8 Series Specifications

General

Brand	Ateis
Model	IDA8 Series
Category	Security System
Language	English