Ateis IDA8 Series User Manual

System Products 49
© 2020, ATEÏS. All rights reserved.
Protocol
Interface
Function
Connection
Settings
Logic I/O Control
3.1.5 IDA8C-SW
IDA8C (Switch Mode) controller requires less number of amplifiers with only 4 audio channels for 4
amplifiers and utilizes with a maximum capacity of 1000 W for each. The AteÏs local-net can be a
network of one controller and a maximum up to 31 Slave units including IDA8C (Switch Mode) and
IDA8C (Matrix Mode) in a local system.
IDA8C (Switch Mode) supports up to 4 sources including Evac/Voice/Music/Backup. Each zone can
be routed to one of the system’s audio channels. The four channels can be switched ON/OFF in
each zone separately. In case of Evacuation, the three channels can be used as a second alarm
channel. One IDA8C (Switch Mode) shall only require up to 4 channel amplifier and the amplifiers will
act as a backup amplifier in case of other amplifiers break down.
Security
In accordance with EN54-16 and BS5839/8, full monitored supervision from paging microphone
capsule to the end of loudspeaker line.
Enhanced loudspeaker line surveillance for A/B zone wiring.
The IDA8C-SW supports redundant network cabling, wired as a redundant loop.
Connectivity
Up to 48 simultaneous audio channels per local network.

Ateis IDA8 Series Specifications

General

Brand	Ateis
Model	IDA8 Series
Category	Security System
Language	English