EasyManuals Logo

Ateis IDA8 Series User Manual

Ateis IDA8 Series
535 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
System Products 61
© 2020, ATEÏS. All rights reserved.
Device
Connection
Max. Num
Function
speaker, a pad with a gooseneck and 8 buttons/zones, and
two pads with 8 buttons/zones.
DialPad
PDC
1
A remote dialer for making telephone calls via IDA8's
telephone hardware.
Wireless
Transceiver
PDC
1
An RF transceiver to communication between DialPad and
IDA8, DialPad can work without a physical connection.
Max. Number: The max. number of peripherals through per PDC port by using a Junction Box. For
example: On the PDC port, you can connect 32 PPM AS through junction boxes and are able to
assign IDs in sequence for each unit in Ateis Studio.
When connecting to both Fireman Mic and other remote units, the priority status of Fireman Mic
shall be higher than any other microphone remote units lining to PDC port.
If a large number of remote units is required, simply add more slave units for the master unit.
Eth. Limit: The maximum number of IP that can be assigned over the network.
3.1.5.5 3rd Party Control
The following table lists the 3rd Party Control protocols supported by IDA8C-SW.
Protocol
Interface
Function
Connection
Settings
Ateis 3rd Party
Protocol
Ethernet(UDP)
UDP Port = 19761
Read/Write value of parameters.
Stepped adjustment for parameters.
Telephone card function
Modbus
Ethernet(TCP)
PDC(RS485)
TCP Port = 502
PDC Port 1~ 4
Level control
Paging
Read Monitoring Status
Read Evacuation Status
Play Message
Logic I/O Control

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ateis IDA8 Series and is the answer not in the manual?

Ateis IDA8 Series Specifications

General IconGeneral
BrandAteis
ModelIDA8 Series
CategorySecurity System
LanguageEnglish

Related product manuals