Ateis IDA8 Series User Manual

IDA8 Global-Net User Manual358
© 2020, ATEÏS. All rights reserved.
6.2.8.2 Gate - Stereo
The stereo Gate channels allows to cut off the signal below the chosen threshold.
Control Window
Mute/Bypass: Mute/disable the Gate's module.
Gate On: Light up when Gate is activated.
Left/Right Gain: Set the volume of the signal
connected to the input L channel/input R
channel.
Thd.: Set the threshold level above which Gate
will open.
Response Time: Adjust the time between the
level's detection and the beginning of the Gate
operation.
Attack Time: Adjust the fade-in time of signal
when the Gate is activated.
Hold Time: Adjust the time between the level's
detection and the Gate operation.
Release Time: Adjust the fade-out time of
signal when the Gate is no longer activated.
Left/Right Depth: Attenuate the level when the
Gate is activated.
6.2.8.3 Gate - Voice
The Gate-Voice is an active detection algorithm which opens only if a human voice is detected.
This is NOT a noise cancellation component.

Ateis IDA8 Series Specifications

General

Brand	Ateis
Model	IDA8 Series
Category	Security System
Language	English