Ateis IDA8 Series User Manual

IDA8 Global-Net User Manual488
© 2020, ATEÏS. All rights reserved.
8 Log List
LOG item
Description
Nand Flash Error
NAND flash access fault for IDA8C(256MB) or IDA8S
(128MB)
I2C Z LED No Response
I2C Z LED Driver Error
I2C Z LED Compare Error
I2C LOGICOUT POWER FAN UEVM No Response
I2C LOGICOUT POWER FAN UEVM Driver Error
I2C LOGICOUT POWER FAN UEVM Compare
Error
I2C EVACU IN No Response
I2C EVACU IN Driver Error
I2C EVACU IN Compare Error
I2C POWER DETECT No Response
I2C POWER DETECT Driver Error
I2C POWER DETECT Compare Error
I2C TEMPERATURE No Response
I2C TEMPERATURE Driver Error
I2C TEMPERATURE Compare Error
I2C FRP_BUTTON SLED No Response
I2C FRP_BUTTON SLED Driver Error
I2C FRP_BUTTON SLED Compare Error
I2C FP MONITOR No Response
I2C FP MONITOR Driver Error
I2C FP MONITOR Compare Error
I2C PCM3168 No Response
I2C PCM3168 Driver Error
I2C PCM3168 Compare Error
I2C ADAPTER No Response
I2C ADAPTER Driver Error
I2C ADAPTER Compare Error
Front panel LED, fan, evac input, temperature detect
and button control fails
SSI Error
Audio board control has a fault
Global Netcard Boot Failure
Gocal ATEIS netcard can't boot
Local Netcard Boot Failure
Local ATEIS net card can't boot
DSP Boot Failure
DSP chip can't boot
Local AteisNet Broken
Local AteisNet Recovery
local ATEIS net card connection status
Local AteisNet Backup Mode
Local AteisNet Normal Mode
local ATEIS net backup connection status
DSP SDRAM Error
The SDRAM of DSP chip error
DSP No Response
DSP chip communication fail
DSP Fault
DSP fail
DSP Recovered
DSP recover when dsp detect error
Preset Table Error
Configuration (.ats file) version not matching
No Preset Table
Can't find a configuration
No Parameter Table
Can't find a DSP parameter
Parameter Table Error
DSP parameter (.ats file) version not matching
Trans Error
DSP chip communication fails
Ethernet Broken
Ethernet connection status

Ateis IDA8 Series Specifications

General

Brand	Ateis
Model	IDA8 Series
Category	Security System
Language	English