Ateis IDA8 Series User Manual

IDA8 Global-Net User Manual194
© 2020, ATEÏS. All rights reserved.
o Select Redundancy Device window- [Software] page.
1. Partly Enabled: Tick the box if you have RU devices to do redundancy; or untick the
box if you do not have the RU devices to do redundancy.
2. Evac Input Channel: Select one channel for external Evac indication.
3. Contact Output Channel: Select one channel as the external contact output channel.
4. Device list: A list of the devices which are ready to do redundancy.
5. Clear: Click on the button to clean the current redundancy configuration.
6. Apply: Click on the button to apply the current setting.
o After applied the setting, the Device window will shows the setting is completed
successfully.
1. : the sign represents IDA8C 1 as the operator end.
2. (1,1) : the sign represents IDA8C 2 as the standby end, as well as the IDA8C 1 back
up end.
Step 2: Drag and drop the "Network" button on to the editing page.
Please note that the IDA8C 2 (back up device) will not be shown on the editing window. Only
the IDA8C 1 will be shown on the editing page.

Ateis IDA8 Series Specifications

General

Brand	Ateis
Model	IDA8 Series
Category	Security System
Language	English