AudioCodes Mediant 1000B - DHCP Parameters

Version 7.2 1023 Mediant 1000B Gateway & E-SBC
User's Manual 65. Configuration Parameters Reference
Parameter Description
163.
Internal SRV Table
Internal SRV Table
configure network > dns
srv2Ip
[SRV2IP]
The table defines the internal SRV table for resolving host names into
DNS A-Records. Three different A-Records can be assigned to a host
name. Each A-Record contains the host name, priority, weight, and port.
The format of the ini file table parameter is:
[SRV2IP]
FORMAT SRV2IP_Index = SRV2IP_InternalDomain,
SRV2IP_TransportType, SRV2IP_Dns1, SRV2IP_Priority1,
SRV2IP_Weight1, SRV2IP_Port1, SRV2IP_Dns2, SRV2IP_Priority2,
SRV2IP_Weight2, SRV2IP_Port2, SRV2IP_Dns3, SRV2IP_Priority3,
SRV2IP_Weight3, SRV2IP_Port3;
[\SRV2IP]
For example:
SRV2IP 0 =
SrvDomain,0,Dnsname1,1,1,500,Dnsname2,2,2,501,$$,0,0,0;
For more information, see ''Configuring the Internal SRV Table'' on page
164.
65.2.8 DHCP Parameters
The Dynamic Host Control Protocol (DHCP) parameters are described in the table below.
Table 65-16: DHCP Parameters
Parameter Description
Enable DHCP
[DHCPEnable]
Enables DHCP client functionality.
 [0] Disable (default)
 [1] Enable
Note:
 For the parameter to take effect, a device reset is required.
 For a detailed description of DHCP, see ''DHCP-based Provisioning''
on page 829.
 The parameter is a "hidden" parameter. Once defined and saved to
flash memory, its value doesn't revert to default even if the parameter
doesn't appear in the ini file.
[DHCP120OptionMode] Enables the acceptance of DHCP Option 120 in DHCP responses sent
by a DHCP server.
 [0] = DHCP Option 120 is not supported and ignored if received in the
DHCP response.
 [1] = (Default) DHCP Option 120 is supported and if received, the