AudioCodes Mediant 1000B - Least Cost Routing Parameters

Version 7.2 1263 Mediant 1000B Gateway & E-SBC
User's Manual 65. Configuration Parameters Reference
Parameter Description
Management LDAP Groups Table
configure system > ldap mgmt-ldap-
groups
[MgmntLDAPGroups]
Defines the users group attribute in the AD and
corresponding management access level.
The format of the ini file table parameter is as follows:
[ MgmntLDAPGroups ]
FORMAT MgmntLDAPGroups_Index =
MgmntLDAPGroups_LdapConfigurationIndex,
MgmntLDAPGroups_GroupIndex,
MgmntLDAPGroups_Level, MgmntLDAPGroups_Group;
[ \MgmntLDAPGroups ]
For more information, see ''Configuring Access Level per
Management Groups Attributes'' on page 249.
LDAP Server Groups Table
LDAP Server Groups Table
configure system > ldap ldap-server-
groups
[LDAPServerGroups]
Defines LDAP Server Groups.
The format of the ini file table parameter is as follows:
[ LdapServerGroups ]
FORMAT LdapServerGroups_Index =
LdapServerGroups_Name, LdapServerGroups_ServerType,
LdapServerGroups_SearchMethod,
LdapServerGroups_CacheEntryTimeout,
LdapServerGroups_CacheEntryRemovalTimeout,
LdapServerGroups_SearchDnsMethod;
[ \LdapServerGroups ]
For more information, see ''Configuring LDAP Server
Groups'' on page 242.
65.13.2 Least Cost Routing Parameters
The Least Cost Routing (LCR) parameters are described in the table below.
Table 65-77: LCR Parameters
Parameter Description
Cost Groups Table
configure voip > sip-
definition least-cost-routing
cost-group
[CostGroupTable]
Defines the Cost Groups for LCR, where each Cost Group is
configured with a name, fixed call connection charge, and a call rate
(charge per minute).
[ CostGroupTable ]
FORMAT CostGroupTable_Index =
CostGroupTable_CostGroupName,
CostGroupTable_DefaultConnectionCost,
CostGroupTable_DefaultMinuteCost;
[ \CostGroupTable ]
For example: CostGroupTable 2 = "Local Calls", 2, 1;
For more information, see ''Configuring Cost Groups'' on page 270.
Cost Groups > Time Band
Table
configure voip > sip-
definition least-cost-routing
cost-group-time-bands
Defines time bands and associates them with Cost Groups.
[CostGroupTimebands]
FORMAT CostGroupTimebands_TimebandIndex =
CostGroupTimebands_StartTime, CostGroupTimebands_EndTime,
CostGroupTimebands_ConnectionCost,
CostGroupTimebands_MinuteCost;