Version 7.2 79 Mediant 1000B Gateway & E-SBC
User's Manual 6. Web-Based Management
6.6 Viewing Logged-In User Information
The username of the currently logged in user is displayed in the top-right corner of the Web
interface. If you click the username (e.g., "Admin"), a pop-up callout appears:
Figure 6-32: Logged-in User Information
The following information is displayed:
'Access Level': User level of the currently logged in user (e.g., Security Administrator).
'Session Time': Duration of the current Web session (starting from login).
The Log Out button is also provided for logging out of the Web session (see ''Logging Off
the Web Interface'' on page 66).
6.7 Configuring Web Session and Access Settings
The following procedure describes how to configure security features related to Web user
sessions and access.
Note: You can only perform the configuration described in this section if you are a
management user with Security Ad
ministrator level or Master level. For more
information, see ''Configuring Management User Accounts'' on page 74.
To configure Web user sessions and access security:
1. Open the Web Settings page (Setup menu > Administration tab > Web & CLI folder
> Web Settings).
2. Under the Session group, configure the following parameters:
Figure 6-33: Configuring Web User Sessions
To Next Page
Loading...
