AudioCodes Mediant 1000B - Automatic Update from Remote Servers

User's Manual 844 Document #: LTRT-27055
Mediant 1000B Gateway & E-SBC
CptFileURL =
'https://www.company.com/call_progress.dat'
♦ CLI:
# configure system
(config-system)# automatic update
(automatic-update)# call-progress-tones
'http://www.company.com/call_progress.dat'
d. Automatic Update of ini configuration file:
♦ ini File:
IniFileURL = 'https://www.company.com/config.ini'
♦ CLI:
# configure system
(config-system)# automatic update
(automatic-update)# voice-configuration
'http://www.company.com/config.ini'
e. Enable Cyclical Redundancy Check (CRC) on downloaded ini file:
♦ ini File:
AUPDCheckIfIniChanged = 1
♦ CLI:
# configure system
(config-system)# automatic update
(automatic-update)# crc-check regular
4. Power down and then power up the device.
47.2.10.2 Automatic Update from Remote Servers
This example describes how to configure the Automatic Update feature where files are
stored and downloaded from different file server types. The example scenario includes the
following:
 NFS server (Version 2) at 10.13.2.10 for storing the CPT file.
 FTPS server at ftpserver.corp.com for storing the Feature Key file. The login
credentials to the server are username "root" and password "wheel".
 HTTP server at www.company.com for storing the configuration file (ini).
 DNS server at 80.179.52.100 for resolving the domain names of the provisioning
servers (FTPS and HTTP).
 To set up Automatic Provisioning for files stored on different server types
(example):
1. CPT file:
a. Set up an NFS server and copy the CPT file to the directory /usr/shared/public on
the NFS server.
b. Configure the device with the NFS server:
[ NFSServers ]
FORMAT NFSServers_Index = NFSServers_HostOrIP, NFSServers_RootPath,
NFSServers_NfsVersion, NFSServers_AuthType, NFSServers_UID,
NFSServers_GID, NFSServers_VlanType;
NFSServers 0 = "10.31.2.10", "/usr/share/public/", 2, 1, 0, 1, 1;
[ \NFSServers ]
c. Configure the device with the URL path of the CPT file:
♦ ini File:
CptFileURL = 'file://10.31.2.10/usr/share/public/usa_tones.dat'