User's Manual 1038 Document #: LTRT-27055
Mediant 1000B Gateway & E-SBC
Parameter Description
private key must be installed on the managing PC. Time and
date must be correctly set on the device for the client certificate
to be verified.
Note:
For the parameter to take effect, a device reset is required.
For a description on implementing client certificates, see ''TLS
for Remote Device Management'' on page 122.
65.4.3 SRTP Parameters
The Secure Real-Time Transport Protocol (SRTP) parameters are described in the table
below.
Table 65-24: SRTP Parameters
Parameter Description
Media Security
configure voip > media
security > media-security-
enable
[EnableMediaSecurity]
Enables Secure Real-Time Transport Protocol (SRTP).
[0] Disable (default)
[1] Enable
Note: For the parameter to take effect, a device reset is required.
Media Security Behavior
configure voip > media
security > media-sec-bhvior
[MediaSecurityBehaviour]
Global parameter that defines the handling of SRTP (when the
EnableMediaSecurity parameter is set to 1). You can also configure
this functionality per specific calls, using IP Profiles
(IpProfile_MediaSecurityBehaviour). For a detailed description of the
parameter and for configuring this functionality in the IP Profiles
table, see Configuring IP Profiles on page 423.
Note: If this functionality is configured for a specific IP Profile, the
settings of this global parameter is ignored for calls associated with
the IP Profile.
Note: The parameter is applicable only to the Gateway application.
Master Key Identifier (MKI)
Size
configure voip > media
security > srtp-tx-packet-mki-
size
[SRTPTxPacketMKISize]
Global parameter that defines the size (in bytes) of the Master Key
Identifier (MKI) in SRTP Tx packets. You can also configure this
functionality per specific calls, using IP Profiles (IpProfile_MKISize).
For a detailed description of the parameter and for configuring this
functionality in the IP Profiles table, see ''Configuring IP Profiles'' on
page 423.
Note: If this functionality is configured for a specific IP Profile, the
settings of this global parameter is ignored for calls associated with
the IP Profile.
Symmetric MKI Negotiation
configure voip > media
security > symmetric-mki
[EnableSymmetricMKI]
Global parameter that enables symmetric MKI negotiation. You can
also configure this functionality per specific calls, using IP Profiles
(IpProfile_EnableSymmetricMKI). For a detailed description of the
parameter and for configuring this functionality in the IP Profiles
table, see ''Configuring IP Profiles'' on page 423.
Note: If this functionality is configured for a specific IP Profile, the
settings of this global parameter is ignored for calls associated with
the IP Profile.
Offered SRTP Cipher Suites Defines the offered crypto suites (cipher encryption algorithms) for
To Next Page
Loading...
