User's Manual 612 Document #: LTRT-27055
Mediant 1000B Gateway & E-SBC
Parameter Description
[ChargeCode_EndTime<1-4>]
The first time period always starts at midnight (00).
It is mandatory that the last time period of each rule end at
midnight (00). This prevents undefined time frames in a day.
Pulse Interval (1 - 4)
pulse-interval-<1-4>
[ChargeCode_PulseInterval<1-4>]
Defines the time interval between pulses (in tenths of a second).
Once the call is established, the device generates a pulse for
each pulse interval.
Pulses On Answer (1 - 4)
pulses-on-answer-<1-4>
[ChargeCode_PulsesOnAnswer<1-
4>]
Defines the number of pulses that the device generates upon
call answer.
27.18 Configuring Voice Mail
The Voice Mail Settings page lets you configure voice mail. For more information on voice
mail, refer to the CPE Configuration Guide for Voice Mail User's Manual. For a detailed
description of the voice mail parameters, see ''Voice Mail Parameters'' on page 1119.
Note: Voice Mail is applicable only to FXO and CAS interfaces.
To configure voice mail:
1. Open the Voice Mail Settings page (Setup menu > Signaling & Media tab > Gateway
folder > Voice Mail Settings).
To Next Page
Loading...
