EasyManua.ls Logo

AudioCodes Mediant 1000B - Automatic Update for Mass Deployment

AudioCodes Mediant 1000B
1281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 7.2 845 Mediant 1000B Gateway & E-SBC
User's Manual 47. Automatic Provisioning
2. Feature Key file:
a. Set up an FTPS server and copy the Feature Key file to the server.
b. Configure the device with the URL path of the Feature Key file:
ini File:
FeatureKeyURL =
'ftps://root:wheel@ftpserver.corp.com/feature_key.txt'
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# feature-key
'ftps://root:wheel@ftpserver.corp.com/feature_key.txt'
(automatic-update)# startup-script
https://company.com/files/startup_script.txt
3. Software (.cmp) and ini files:
a. Set up an HTTP Web server and copy the .cmp and configuration files to the
server.
b. Configure the device with the URL paths of the .cmp and ini files:
ini File:
AutoCmpFileUrl =
'http://www.company.com/device/sw.cmp'
IniFileURL = 'http://www.company.com/device/inifile.ini'
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# auto-firmware 'http://www.company.com/sw.cmp'
4. Configure the device with the IP address of the DNS server for resolving the domain
names of the FTPS and HTTP servers:
[ InterfaceTable ]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes,
InterfaceTable_InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName,
InterfaceTable_PrimaryDNSServerIPAddress,
InterfaceTable_SecondaryDNSServerIPAddress,
InterfaceTable_UnderlyingDevice;
InterfaceTable 0 = 6, 10, 10.15.7.95, 16, 10.15.0.1, 1,
"Voice", 80.179.52.100, 0.0.0.0, "vlan 1";
[ \InterfaceTable ]
5. Configure the device to perform the Automatic Update process daily at 03:00 (3 a.m):
ini File:
AutoUpdateFrequency = '03:00'
CLI:
# configure system
(config-system)# automatic update
(automatic-update)# update-frequency 03:00
47.2.10.3 Automatic Update for Mass Deployment
This example describes how to configure the Automatic Update feature for updating
multiple devices (i.e., mass deployment) using an HTTP provisioning server. In this

Table of Contents

Other manuals for AudioCodes Mediant 1000B

Related product manuals