User's Manual 896 Document #: LTRT-27055
Mediant 1000B Gateway & E-SBC
54.3 Viewing Proxy Set Status
You can view the status of Proxy Sets that are used in your call routing topology. Proxy
Sets that are not associated with any routing rule are not displayed.
To configure proxy Sets, see Configuring Proxy Sets on page 367.
To view Proxy Set status:
Open the Active Proxy Set Status page (Monitor menu > Monitor tab > VoIP Status
folder > Proxy Sets Status).
Figure 54-3: Viewing Proxy Sets Status
Table 54-3: Proxy Sets Status Table Description
Parameter Description
Proxy Set ID
Displays the Proxy Set ID.
Mode
Displays the Proxy Sets' operational mode:
"Parking" or "Homing": Redundancy mode, as configured by the
ProxySet_ProxyRedundancyMode parameter.
"Load Balancing: Proxy load balancing mode, as configured by
the ProxySet_ProxyRedundancyMode parameter.
For more information, see Configuring Proxy Sets.
Keep Alive
Displays whether the Proxy Keep-Alive feature is enabled ("Enabled")
or disabled ("Disabled"), as configured by the
ProxySet_EnableProxyKeepAlive parameter (see Configuring Proxy
Sets).
Address
Displays the IP address of the proxy server. This can be the IP
address as configured in dotted-decimal notation for the Proxy Set, or
the resolved IP address of a DNS query if an FQDN is configured for
the Proxy Set. IP addresses resolved from FQDNs are displayed as
"<FQDN name>(<resolved IP address>)", for example,
"abc.com(10.8.6.80)". The IP address that is currently used for routing
is indicated with an asterisk, for example, "10.8.6.89(*)".
If the FQDN failed to be resolved, only the FQDN name is displayed
(e.g., "abc.com").
Priority
Displays the priority of IP addresses resolved from FQDNs.
To Next Page
Loading...
