EasyManua.ls Logo

AudioCodes Mediant 1000B - Page 1262

AudioCodes Mediant 1000B
1281 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User's Manual 1262 Document #: LTRT-27055
Mediant 1000B Gateway & E-SBC
Parameter Description
> ldap-primary-key
[MSLDAPPrimaryKey]
for the destination number in the AD. This is used instead of
the "PBX" attribute name (configured by the
MSLDAPPBXNumAttributeName parameter).
The default is not configured.
configure voip > sip-definition settings
> ldap-secondary-key
[MSLDAPSecondaryKey]
Defines the name of the attribute used as the second query
search key for the destination number in the AD, if the
primary search key or PBX search is not found.
LDAP Cache Service
configure system > ldap settings >
ldap-cache-enable
[LDAPCacheEnable]
Enables the LDAP cache service.
[0] Disable (default)
[1] Enable
Note:
For the parameter to take effect, a device reset is
required.
For more information on LDAP caching, see ''Configuring
the Device's LDAP Cache'' on page 251.
LDAP Servers Table
LDAP Servers
configure system > ldap ldap-
configuration
[LdapConfiguration]
Defines LDAP servers.
The format of the ini file table parameter is as follows:
[ LdapConfiguration ]
FORMAT LdapConfiguration_Index =
LdapConfiguration_Group,
LdapConfiguration_LdapConfServerIp,
LdapConfiguration_LdapConfServerPort,
LdapConfiguration_LdapConfServerMaxRespondTime,
LdapConfiguration_LdapConfServerDomainName,
LdapConfiguration_LdapConfPassword,
LdapConfiguration_LdapConfBindDn,
LdapConfiguration_Interface,
LdapConfiguration_MngmAuthAtt,
LdapConfiguration_useTLS,
LdapConfiguration_ConnectionStatus;
[ \LdapConfiguration ]
For more information, see ''Configuring LDAP Servers'' on
page 244.
LDAP Server Search Base DN Table
LDAP Server Search Base DN Table
configure system > ldap ldap-servers-
search-dns
[LdapServersSearchDNs]
Defines the full base path (i.e., distinguished name / DN) to
the objects in the AD where the query is done, per LDAP
server.
The format of the ini file table parameter is as follows:
[ LdapServersSearchDNs ]
FORMAT LdapServersSearchDNs_Index =
LdapServersSearchDNs_Base_Path,
LdapServersSearchDNs_LdapConfigurationIndex,
LdapServersSearchDNs_SearchDnInternalIndex;
[ \LdapServersSearchDNs ]
For more information, see ''Configuring LDAP DNs (Base
Paths) per LDAP Server'' on page 247.
Management LDAP Groups Table

Table of Contents

Other manuals for AudioCodes Mediant 1000B

Related product manuals