AudioCodes Mediant 1000B - Page 1046

User's Manual 1046 Document #: LTRT-27055
Mediant 1000B Gateway & E-SBC
Parameter Description
Quality of Experience
Color Rules
configure voip > qoe qoe-
color-rules
[QOEColorRules]
The table defines Quality of Experience Color Rules.
The format of the ini file table parameter is as follows:
[QOEColorRules]
FORMAT QOEColorRules_Index = QOEColorRules_QoeProfile,
QOEColorRules_ColorRuleIndex, QOEColorRules_monitoredParam,
QOEColorRules_direction, QOEColorRules_profile,
QOEColorRules_MinorThreshold, QOEColorRules_MinorHysteresis,
QOEColorRules_MajorThreshold, QOEColorRules_MajorHysteresis;
[\QOEColorRules]
For more information, see ''Configuring Quality of Experience Profiles''
on page 315.
Bandwidth Profile Table
Bandwidth Profile
configure voip > qoe bw-
profile
[BWProfile]
The table defines Bandwidth Profiles.
The format of the ini file table parameter is as follows:
[BWProfile]
FORMAT BWProfile_Index = BWProfile_Name,
BWProfile_EgressAudioBandwidth, BWProfile_IngressAudioBandwidth,
BWProfile_EgressVideoBandwidth, BWProfile_IngressVideoBandwidth,
BWProfile_TotalEgressBandwidth, BWProfile_TotalIngressBandwidth,
BWProfile_WarningThreshold, BWProfile_hysteresis,
BWProfile_GenerateAlarms;
[\BWProfile]
For more information, see ''Configuring Bandwidth Profiles'' on page 320
.
Note: For the parameter to take effect, a device reset is required.
Quality of Service Rules Table
Quality of Service Rules
configure voip > qoe
quality-of-service-rules
[QualityOfServiceRules]
Defines Quality of Service rules.
The format of the ini file table parameter is as follows:
[ QualityOfServiceRules ]
FORMAT QualityOfServiceRules_Index =
QualityOfServiceRules_IPGroupName,
QualityOfServiceRules_RuleMetric, QualityOfServiceRules_Severity,
QualityOfServiceRules_RuleAction,
QualityOfServiceRules_CallsRejectDuration,
QualityOfServiceRules_AltIPProfileName;
[ \QualityOfServiceRules ]
For more information, see ''Configuring Quality of Service Rules'' on
page 324
Performance Profile Table
Performance Profile
configure system >
performance-profile
[PerformanceProfile]
Defines alarm thresholds per metric (ASR, ACD and NER).
The format of the ini file table parameter is as follows:
[ PerformanceProfile ]
FORMAT PerformanceProfile_Index = PerformanceProfile_Entity,
PerformanceProfile_IPGroupName, PerformanceProfile_SRDName,
PerformanceProfile_PMType, PerformanceProfile_MinorThreshold,
PerformanceProfile_MajorThreshold, PerformanceProfile_Hysteresis,
PerformanceProfile_MinimumSample, PerformanceProfile_WindowSize;
[ \PerformanceProfile ]
For more information, see ''Configuring Performance Profiles'' on page