AudioCodes Mediant 1000B - Page 1094

User's Manual 1094 Document #: LTRT-27055
Mediant 1000B Gateway & E-SBC
Parameter Description
2, 200, 0;
For more information, see Configuring SIP Message Manipulation on
page 401.
Message Policies Table
Message Policies
configure voip > message
message-policy
[MessagePolicy]
Defines SIP message policy rules for blocking (blacklist) unwanted
incoming SIP messages or allowing (whitelist) receipt of desired
messages.
The format of the ini file table parameter is as follows:
[MessagePolicy]
FORMAT MessagePolicy_Index = MessagePolicy_Name,
MessagePolicy_MaxMessageLength,
MessagePolicy_MaxHeaderLength, MessagePolicy_MaxBodyLength,
MessagePolicy_MaxNumHeaders, MessagePolicy_MaxNumBodies,
MessagePolicy_SendRejection, MessagePolicy_MethodList,
MessagePolicy_MethodListType, MessagePolicy_BodyList,
MessagePolicy_BodyListType,
MessagePolicy_UseMaliciousSignatureDB;
[/MessagePolicy]
For more information, see Configuring SIP Message Policy Rules.
configure voip > sip-
definition settings >
message-policy-reject-
response-type
[MessagePolicyRejectResp
onseType]
Defines the SIP response code that the device sends when it rejects
an incoming SIP message due to a matched Message Policy in the
Message Policies table, whose ‘Send Reject’
(MessagePolicy_SendRejection) parameter is configured to Policy
Reject [0].
The default is 400 "Bad Request".
To configure Message Policies, see Configuring SIP Message Policy
Rules.
Pre-Parsing Manipulation Sets Table
Pre-Parsing Manipulation
Sets
configure voip >
message pre-parsing-
manip-sets
[PreParsingManipulationSet
s]
Defines Pre-parsing Manipulation Sets.
The format of the ini file table parameter is as follows:
[ PreParsingManipulationSets ]
FORMAT PreParsingManipulationSets_Index =
PreParsingManipulationSets_Name;
[ \PreParsingManipulationSets ]
For more information, see Configuring Pre-parsing Manipulation
Rules on page 412.
Pre-Parsing Manipulation Rules Table
Pre-Parsing Manipulation
Rules
configure voip >
message pre-parsing-
manip-rules
[PreParsingManipulationRule
s]
Defines Pre-parsing Manipulation rules.
The format of the ini file table parameter is as follows:
[ PreParsingManipulationRules ]
FORMAT PreParsingManipulationRules_Index =
PreParsingManipulationRules_PreParsingManSetName,
PreParsingManipulationRules_RuleIndex,
PreParsingManipulationRules_MessageType,
PreParsingManipulationRules_Pattern,
PreParsingManipulationRules_ReplaceWith;
[ \PreParsingManipulationRules ]
For more information, see Configuring Pre-parsing Manipulation
Rules on page 412.