Version 7.2 133 Mediant 1000B Gateway & E-SBC
User's Manual 12. Network
Item # Description
For more information on configuring Ethernet Devices, see ''Configuring Underlying
Ethernet Devices'' on page 139.
3 Configures and displays Ethernet Groups.
The Ethernet Groups appear as icons, displaying the row index number and name, as
shown in the example below:
Ethernet ports associated with Ethernet Groups are indicated by lines connecting between
them, as shown in the example below:
To edit an Ethernet Group:
1 Click the Ethernet Group icon, and then from the drop-down menu, choose Edit; the
Ethernet Groups table opens with a dialog box for editing the Ethernet Group.
2 Configure the Ethernet Group as desired, and then click Apply; the Ethernet Groups
table closes and you are returned to the Network View.
For more information on configuring IP Interfaces, see ''Configuring Ethernet Port Groups''
on page 136.
To open the Ethernet Groups table, click any Ethernet Group icon, and then from the drop-
down menu, choose View List. You can then view and edit all the Ethernet Groups in the
table.
4 Configures and displays the device's Ethernet ports.
To configure an Ethernet port:
1 Click the required port icon, and then from the drop-down menu, choose Edit; the
Physical Ports table opens with a dialog box for editing the Ethernet port.
2 Configure the Ethernet Port as desired, and then click Apply; the Physical Ports table
closes and you are returned to the Network View.
For more information on configuring Ethernet ports, see ''Configuring Underlying Ethernet
Devices'' on page 139.
The Ethernet ports appear as icons, displaying the row index number, description, and port
string number, as shown in the example below:
The connectivity status of the port is indicated by the color of the icon:
Green: Network connectivity exists through port (port connected to network).
Red: No network connectivity through port (e.g., cable disconnected).
To Next Page
Loading...
