AudioCodes Mediant 1000B - Page 178

User's Manual 178 Document #: LTRT-27055
Mediant 1000B Gateway & E-SBC
 "DEFAULT_PROXY": IDS Policy for proxy server
 "DEFAULT_GLOBAL": IDS Policy with global thresholds
Note: The default IDS Policies are read-only and cannot be modified.
The following procedure describes how to configure IDS Policies through the Web
interface. You can also configure it through ini file or CLI:
 IDS Policy table: IDSPolicy (ini file) or configure voip > ids policy (CLI)
 IDS Rules table: IDSRule (ini file) or configure voip > ids rule (CLI)
 To configure an IDS Policy:
1. Open the IDS Policies table (Setup menu > Signaling & Media tab > Intrusion
Detection folder > IDS Policies); the table displays the pre-configured IDS policies:
Figure 13-4: IDS Policies Table with Default Rules
2. Click New; the following dialog box appears:
Figure 13-5: IDS Policies Table - Add Dialog Box
3. Configure an IDS Policy name according to the parameters described in the table
below.
4. Click Apply.
Table 13-3: IDS Policies Table Parameter Descriptions
Parameter Description
Index
policy
[IDSPolicy_Index]
Defines an index number for the new table row.
Note: Each row must be configured with a unique index.
Name
rule
Defines a descriptive name, which is used when associating the row
in other tables.