AudioCodes Mediant 800 - Page 1031

CHAPTER53 System Status
Mediant 800 Gateway & E-SBC | User's Manual
Field Description
■ "0": On hook
■ "1": Off hook
Note: The parameter is applicable only to analog interfaces.
Ring Status of ringing:
■ "0": Off
■ "1": On
Note: The parameter is applicable only to analog interfaces.
Line Connected Line status:
■ "0": Disconnected
■ "1": Connected
Note: The parameter is applicable only to analog interfaces.
Polarity state Port polarity:
■ "0": Normal
■ "1": Reversed
■ "2": N\A
Note: The parameter is applicable only to analog interfaces.
Line polarity Line polarity:
■ "0": Positive
■ "1": Negative
Note: The parameter is applicable only to analog interfaces.
Message Waiting
Indication
MWI status:
■ "0": Off
■ "1": On
Note: The parameter is applicable only to analog interfaces.
RTP/RTCP
Channel Identifier Channel identifier number.
RTP Direction Direction of RTP:
"Tx & Rx": both directions (transmit and receive)
Local UDP Port Local UDP port on the device.
Remote IP Addr IP address of the remote IP side.
Remote UDP Port Port of the remote IP side.
Rx Octet Count Total number of received packets.
Tx Octet Count Total number of transmitted packets.
Network Jitter Network jitter (in msec).
Roundtrip Delay Round-trip delay time (in msec).
- 991 -