AudioCodes Mediant 800 - Page 1215

CHAPTER72 Configuration Parameters Reference
Mediant 800 Gateway & E-SBC | User's Manual
Parameter Description
For example:
'http://server_name/file'
'https://server_name/file'
Note: The maximum length of the URL address is 99
characters.
voice-prompts
[VpFileURL]
Defines the name of the Voice Prompts file and the URL
address (IP address or FQDN) of the server on which the file
is located. Optionally, the username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
For example:
'http://server_name/file'
'https://server_name/file'
Note:
■ The maximum length of the URL address is 99 characters.
cas-table
[CasFileURL]
Defines the name of the CAS file and the URL address (IP
address or FQDN) of the server where the file is located.
Optionally, the username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
For example:
'http://server_name/file'
'https://server_name/file'
Note: The maximum length of the URL address is 99
characters.
dial-plan-csv
[DialPlanCSVFileUrl]
Defines the name of the Dial Plan file (.csv) and the URL
address of the server where the file is located. Optionally, the
username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
tls-root-cert
[TLSRootFileUrl]
Defines the name of the TLS trusted root certificate file and
the URL address of the server where the file is located.
Optionally, the username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
Note: For the parameter to take effect, a device reset is
required.
- 1175 -