AudioCodes Mediant 800 - Page 1214

CHAPTER72 Configuration Parameters Reference
Mediant 800 Gateway & E-SBC | User's Manual
Parameter Description
■ When using HTTP or HTTPS, the date and time of the ini
file are validated. Only more recently dated ini files are
loaded.
■ MAC Address Placeholder in Configuration File Name.
This option allows the loading of specific configurations for
specific devices.
■ The maximum length of the URL address is 99 characters.
cli-script <URL>
[CliScriptURL]
Defines the URL of the server where the CLI Script file
containing the device's configuration is located. This file is
used for automatic provisioning. Optionally, the username and
password ('https://username:password@10.1.1.1/<file
name>') for access authentication with the server can also be
configured.
Note: The case-sensitive string, "<MAC>" can be used in the
filename, which is automatically replaced with the device's
MAC address. For more information, see MAC Address
Placeholder in Configuration File Name.
startup-script <URL>
[CLIStartupScriptUrl]
Defines the URL address of the server where the CLI Startup
Script file containing the device's configuration is located.
This file is used for automatic provisioning. Optionally, the
username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
Note:
■ The case-sensitive string, "<MAC>" can be used in the file
name for instructing the device to replace it with the
device's MAC address. For more information, see MAC
Address Placeholder in Configuration File Name.
■ The file is not supported when the device operates in HA
mode.
prerecorded-tones
[PrtFileURL]
Defines the name of the Prerecorded Tones (PRT) file and the
URL address (IP address or FQDN) of the server where the
file is located. Optionally, the username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
For example:
'http://server_name/file'
'https://server_name/file'
Note: The maximum length of the URL address is 99
characters.
call-progress-tones
[CptFileURL]
Defines the name of the CPT file and the URL address (IP
address or FQDN) of the server where the file is located.
Optionally, the username and password
('https://username:password@10.1.1.1/<file name>') for
access authentication with the server can also be configured.
- 1174 -