Content
Mediant 800 Gateway & E-SBC | User's Manual
Configuring Dual Registration for SIP Entity 844
Handling Registered AORs with Same Contact URIs 847
Enabling Interworking of SIP and SIP-I Endpoints 848
Configuring SBC MoH from External Media Source 850
WebRTC 853
SIP over WebSocket 855
Configuring WebRTC 857
Call Forking 859
Initiating SIP Call Forking 860
Configuring SIP Forking Initiated by SIP Proxy 860
Configuring Call Forking-based IP-to-IP Routing Rules 861
Call Survivability 861
Enabling Auto-Provisioning of Subscriber-Specific Information of BroadWorks Server for
Survivability 861
Configuring BroadSoft's Shared Phone Line Call Appearance for Survivability 862
Configuring Call Survivability for Call Centers 863
Enabling Survivability Display on Aastra IP Phones 865
Alternative Routing on Detection of Failed SIP Response 866
VoIPerfect 866
Part VII 870
Cloud Resilience Package 870
38 CRP Overview 871
39 CRP Configuration 873
Configuring Call Survivability Mode 873
Pre-Configured IP Groups 874
Pre-Configured IP-to-IP Routing Rules 875
Normal Mode 875
Emergency Mode 876
Auto Answer to Registrations 877
Configuring PSTN Fallback 878
Part VIII 879
High-Availability System 879
40 HA Overview 880
Connectivity and Synchronization between Devices 880
Device Switchover upon Failure 881
Viewing HA Status on Monitor Web Page 882
41 HA Configuration 884
Initial HA Configuration 884
Network Topology Types and Rx/Tx Ethernet Port Group Settings 884
Configuring the HA Devices 885
Step 1: Configure the First Device 886
Step 2: Configure the Second Device 887
- xxxiii -
To Next Page
Loading...
