Content
Mediant 800 Gateway & E-SBC | User's Manual
Step 3: Initialize HA on the Devices 888
Quick-and-Easy Initial HA Configuration 889
Configuration while HA is Operational 890
Configuring Firewall Allowed Rules 891
Configuring DiffServ for HA Maintenance Traffic 892
Monitoring IP Entities and HA Switchover upon Ping Failure 892
42 HA Maintenance 897
Maintenance of Redundant Device 897
Replacing a Failed Device 897
Initiating an HA Switchover 897
Resetting the Redundant Unit 897
Software Upgrade 898
Disconnecting and Reconnecting HA 898
Accessing Files on Redundant Device from Active through SSH 899
Backing Up and Restoring HA Configuration 900
Part IX 901
Maintenance 901
43 Basic Maintenance 902
Resetting the Device 902
Remotely Resetting Device using SIP NOTIFY 903
Locking and Unlocking the Device 903
Saving Configuration 905
44 Channel Maintenance 906
Disabling Analog Ports 906
Resetting an Analog Channel 906
Restarting a B-Channel 906
Locking and Unlocking Trunk Groups 907
Disconnecting Active Calls 908
Remotely Disconnecting Calls using SIP NOTIFY 908
Configuring Names for Telephony Ports 909
45 Upgrading the Device's Software 910
46 Loading Auxiliary Files 916
Loading Auxiliary Files through Web Interface 917
Loading Auxiliary Files through CLI 918
Deleting Auxiliary Files 919
Call Progress Tones File 919
Distinctive Ringing 922
Prerecorded Tones File 924
CAS Files 925
AMD Sensitivity File 925
User Info File 926
- xxxiv -
To Next Page
Loading...
