CHAPTER45 Upgrading the Device's Software
Mediant 800 Gateway & E-SBC | User's Manual
If you use the wizard to load an ini file, parameters excluded from the ini file are
assigned default values (according to the .cmp file) and thereby, overwrite values
previously configured for these parameters.
10. Click Reset; a progress bar is displayed, indicating the progress of saving the files to flash and
device reset.
Device reset may take a few minutes (even up to 30 minutes), depending on .cmp file
version.
When the device finishes the installation process and resets, the wizard displays the following,
which lists the installed .cmp software version and other files that you may also have installed:
- 914 -
To Next Page
Loading...
