Appendix F: PID Control
Page Fâ5
DuRApulse GS4 AC Drive User Manual â 1st Ed, Rev A - 10/20/2017
Common aPPliCationS for PiD Control
1)
Flow control: A flow sensor is used to feedback the flow data and performs accurate flow
control.
2)
Pressure control: A pressure sensor is used to feedback the pressure data and perform precise
pressure control.
3)
Air volume control: An air volume sensor is used to feedback the air volume data to have
excellent air volume regulation.
4)
Temperature control: A thermocouple or thermistor is used to feedback temperature data for
comfortable temperature control.
5)
Speed control: A speed sensor or encoder is used to feedback motor shaft speed or input
another machines speed as a target value for closed loop speed control of master-slave
operation.
To Next Page
Loading...
