14
V2.6 | 8/30/2022 | 1120758
2. General safety Instructions
Caution
Heat can damage the camera. Provide adequate dissipation of heat, to
ensure that the temperature does not exceed the value (see Heat Trans-
mission).
As there are numerous possibilities for installation, Baumer recommends
no specic method for proper heat dissipation, but suggest the following
principle:
▪ operate the cameras only in mounted condition with free air circulation
▪ mounting in combination with forced convection may provide proper heat
dissipation
see chapter „4.2 Ambient Temperature / Heat Transmission“ on page 25
Caution
Observe precautions for handling electrostatic sensitive devices!
To Next Page
Loading...
