Baumer VLXT - Actionselector; Category: Analogcontrol; Balancewhiteauto (Color Cameras Only)

66
V2.6 | 8/30/2022 | 1120758
7.2.4 ActionSelector
Selects to which Action Signal further Action settings apply.
Name ActionSelector
Category AnalogControl
Interface IInteger
Access Read / Write
Unit -
Values 1 - 1 (Increment: 1)
7.3 Category: AnalogControl
Features in this chapter describes how to inuence the analog features of an image, such
as gain, black level, brightness correction and gamma.
7.3.1 BalanceWhiteAuto (color cameras only)
Controls the mode for automatic white balancing between the color channels. The white
balancing ratios are automatically adjusted.
Name BalanceWhiteAuto
Category AnalogControl
Interface IEnumeration
Access Read / Write
Unit -
Values
Continuous White balancing is constantly adjusted by the device.
Off White balancing is off.
Once
White balancing is automatically adjusted once by the
device. Once it has converged, it automatically returns
to the Off state.