Baumer VLXT - Gevcurrentsubnetmask; Gevfirsturl; Gevgvcpextendedstatuscodes; Gevgvcpextendedstatuscodesselector

188
V2.6 | 8/30/2022 | 1120758
7.20.2.8 GevCurrentSubnetMask
Reports the subnet mask of the given logical link.
Name GevCurrentSubnetMask
Category GigEVision
Interface IInteger
Access Read only
Unit -
Values IP address
7.20.2.9 GevFirstURL
Indicates the rst URL to the GenICam XML device description le. The First URL is used
as the rst choice by the application to retrieve the GenICam XML device description le.
Name GevFirstURL
Category GigEVision
Interface IString
Access Read only
Unit -
Values URL
7.20.2.10 GevGVCPExtendedStatusCodes
Enables the generation of extended status codes.
Name GevGVCPExtendedStatusCodes
Category GigEVision
Interface IBoolean
Access Read / Write
Unit -
Values
true = 1 (On)
false = 0 (Off)
7.20.2.11 GevGVCPExtendedStatusCodesSelector
Selects the GigE Vision version to control extended status codes for.
Name GevGVCPExtendedStatusCodesSelector
Category GigEVision
Interface IEnumeration
Access Read / Write
Unit -
Values
Version1_1 Version1_1.
Version2_0 Version2_0.