Baumer VLXT - Software; Baumer GAPI; Neoapi; Rd Party Software

53
V2.6 | 8/30/2022 | 1120758
Camera
Type
± x
M
[mm]
± y
M
[mm]
± x
R
[mm]
± Y
R
[mm]
Z***
typ
[mm]
± α
typ
[°]
A***
[mm]
D**
[mm]
VLXT-06* 0,05 0,05 0,05 0,05 17,53 ±0,05 0,25 15,6 0,5
VLXT-17* 0,05 0,05 0,05 0,05 17,53 ±0,05 0,25 15,6 0,5
VLXT-28* 0,05 0,05 0,05 0,05 17,53 ±0,05 0,25 15,6 0,5
VLXT-31* 0,14 0,14 0,15 0,15 17,53 ±0,05 0,5 16,33 0,7
VLXT-50* 0,14 0,14 0,15 0,15 17,53 ±0,05 0,5 16,33 0,7
VLXT-55* 0,05 0,05 0,05 0,05 17,53 ±0,05 0,25 15,6 0,5
VLXT-71* 0,05 0,05 0,05 0,05 17,53 ±0,05 0,25 15,6 0,5
VLXT-81* 0,05 0,05 0,05 0,05 17,53 ±0,05 0,25 15,6 0,5
VLXT-90* 0,1 0,1 0,11 0,11 17,53 ±0,05 0,5 16,33 0,7
VLXT-123* 0,1 0,1 0,11 0,11 17,53 ±0,05 0,5 16,33 0,7
VLXT-126* 0,05 0,05 0,05 0,05 17,53 ±0,05 0,25 15,6 0,5
VLXT-240* 0,05 0,05 0,05 0,05 17,53 ± 0,05 0,07 15,8 0,5
VLXT-490* 0,11 0,10 0,11 0,10 12 ± 0,25 0,13 10,45 0,9
VLXT-650* 0,11 0,10 0,11 0,10 12 ± 0,25 0,13 10,45 0,9
6.3 Software
6.3.1 Baumer GAPI
Baumer GAPI stands for Baumer “Generic Application Programming Interface”. With this
API Baumer provides an interface for quick and easy integration of Baumer industrial
cameras using C++, C, and C# (Windows only). This software interface allows changing
to other camera models.
This API supports Windows, Linux and ARM-based platforms.
More information can be found at: www.baumer.com/vision/software
6.3.2 NeoAPI
The NeoAPI is a powerful, user-friendly API for camera integration. It allows quick integra-
tion of Baumer cameras in C++, C#, and Python with only a few lines of code.
This API supports Windows, Linux and ARM-based platforms.
More information can be found at: www.baumer.com/neoAPI
6.3.3 3
rd
Party Software
Strict compliance with the GenICam™ standard allows Baumer to offer the use of 3
rd
Party Software for operation with cameras of this series.
You can nd a current listing of 3
rd
Party Software, which was tested successfully in com-
bination with Baumer cameras, at: https://www.baumer.com/c/14180
typical accuracy by
assumption of the root
mean square value
* C or M
** Dimension D in this
table is from manufac-
turer datasheet
*** for color add 0.35
mm to normal value