EasyManua.ls Logo

Baumer VLXT - Reversex (Only Mono Cameras; Pixel Formats); Reversey (Only Monochrome Cameras; Pixel Formats); Sensoraddigitization

Baumer VLXT
226 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
154
V2.6 | 8/30/2022 | 1120758
7.13.22 ReverseX(onlymonocameras/pixelformats)
Flip horizontally the image sent by the device. The Region of interest is applied before
the ipping.
Notice
The camera must be stopped before this feature can be set.
Name ReverseX
Category ImageFormatControl
Interface IBoolean
Access Read / Write
Unit -
Values
true = 1 (On)
false = 0 (Off)
7.13.23 ReverseY(onlymonochromecameras/pixelformats)
Flip vertically the image sent by the device. The Region of interest is applied before the
ipping.
Notice
The camera must be stopped before this feature can be set.
Name ReverseY
Category ImageFormatControl
Interface IBoolean
Access Read / Write
Unit -
Values
true = 1 (On)
false = 0 (Off)
7.13.24 SensorADDigitization
The feature controls the sensors AD digitization in bits per pixels.
Notice
The camera must be stopped before this feature can be set.
Name SensorADDigitization
Category ImageFormatControl
Interface IEnumeration
Access Read / Write
Unit -
Values
Bpp10 The sensors AD digitization is 10 bit per pixel.
Bpp12 The sensors AD digitization is 12 bit per pixel.
Bpp8 The sensors AD digitization is 8 bits per pixel

Table of Contents

Related product manuals