Baumer VLXT - Gamma; Highconversiongainenable; Highconversiongain

70
V2.6 | 8/30/2022 | 1120758
7.3.7 Gamma
Controls the gamma correction of pixel intensity. This is typically used to compensate for
non-linearity of the display system (such as CRT).
Name Gamma
Category AnalogControl
Interface IFloat
Access Read / Write
Unit -
Values 0.1 - 2.0 (Increment: 0.10)
7.3.8 HighConversionGainEnable
Enables the high conversion gain mode inside the sensor.
This function makes the image brighter. However, the quality of the image is better than
when the exposure time alone is increased. Combine both functions.
Notice
The camera must be stopped before this feature can be edited.
The following cameras support this function:
Camera Type HighConversionGainEnable
Mono
VLXT-06M.I ■
VLXT-17M.I ■
VLXT-28M.I ■
VLXT-71M.I ■
Color
VLXT-71C.I ■
Name HighConversionGainEnable
Category AnalogControl
Interface IBoolean
Access Read / Write
Unit -
Values
true = 1 (On)
false = 0 (Off)
7.3.9 HighConversionGain
Returns the high conversion gain of the sensor.
Name HighConversionGain
Category AnalogControl
Interface IFloat
Access Read only
Unit -
Values 1.0 - dependent on sensor (Increment: 1.00)