Baumer VLXT - Usersetfeatureenable; Usersetfeatureselector

205
V2.6 | 8/30/2022 | 1120758
7.21.2 UserSetFeatureEnable
Enables the selected feature and make it active in all the UserSets.
Name UserSetFeatureEnable
Category UserSetControl
Interface IBoolean
Access Read only
Unit -
Values
true = 1 (On)
false = 0 (Off)
7.21.3 UserSetFeatureSelector
Selects which individual UserSet feature to control.
Name UserSetFeatureSelector
Category UserSetControl
Interface IEnumeration
Access Read / Write
Unit -
Values see table below
Parameter
AcquisitionFrameCount ExposureAutoMaxValue
(≥ Rel. 2)
LinePWMMaxDutyCycle
AcquisitionFrameRate ExposureAutoMinValue
(≥ Rel. 2)
LinePWMMode
AcquisitionFrameRate-
Enable
ExposureMode LineSource
AcquisitionMode ExposureTime OffsetX
ActionDeviceKey FrameCounter OffsetY
ActionGroupKey Gain PixelFormat
ActionGroupMask GainAuto
(≥ Rel. 2)
PtpEnable (≥ Rel. 2)
AutoFeatureHeight
(≥ Rel. 2)
GainAutoMaxValue
(≥ Rel. 2)
PtpMode (≥ Rel. 2)
AutoFeatureOffsetX
(≥ Rel. 2)
GainAutoMinValue
(≥ Rel. 2)
ReadoutMode
AutoFeatureOffsetY
(≥ Rel. 2)
Gamma ReverseX
AutoFeatureRegionMode
(≥ Rel. 2)
GevSCFTD ReverseY
AutoFeatureRegionRefer-
ence (≥ Rel. 2)
GevSCPD SensorADDigitization
AutoFeatureWidth
(≥ Rel. 2)
HDR Enable SensorShutterMode
(≥ Rel. 2)
BalanceWhiteAuto HDRExposure TimeRatio SequencerSetNext
BinningHorizontal HDRProcessingEnable SequencerSetStart
BinningHorizontalMode HDRProcessingThreshold-
Max
SequencerTrigger-
Activation