Baumer VLXT - Gevprimaryapplicationswitchoverkey; Gevscda; Gevscftd; Gevscpd

193
V2.6 | 8/30/2022 | 1120758
7.20.2.28 GevPrimaryApplicationSwitchoverKey
Controls the key to use to authenticate primary application switchover requests.
Name GevPrimaryApplicationSwitchoverKey
Category GigEVision
Interface IInteger
Access Write only
Unit -
Values ≥ 0
7.20.2.29 GevSCDA
Controls the destination IP address of the selected stream channel to which a GVSP
transmitter must send data stream or the destination IP address from which a GVSP re-
ceiver may receive data stream.
Name GevSCDA
Category GigEVision
Interface IInteger
Access Read / Write
Unit -
Values ≥ 0
7.20.2.30 GevSCFTD
This feature indicates the delay (in timestamp counter unit) to insert between each block
(image) for this stream channel.
Name GevSCFTD
Category GigEVision
Interface IInteger
Access Read / Write
Unit -
Values 0 ... 4294967295 (Increment: 1)
7.20.2.31 GevSCPD
Controls the delay (in timestamp counter unit) to insert between each packet for this
stream channel. This can be used as a crude ow-control mechanism if the application or
the network infrastructure cannot keep up with the packets coming from the device.
Name GevSCPD
Category GigEVision
Interface IInteger
Access Read / Write
Unit -
Values 0 ... 4294967295 (Increment: 1)